Miten rakentaa Cinder Block Pilaster
Pilastereilla tuetaan katoksi- ja lattiakuormia koteihin ja rakennuksiin, jotka ulkonevat seinästä sen sijaan, että seisomaan yksin. Vaikka pilasteri voidaan rakentaa puusta tai metallista, ne ovat yleisimmin rakennettu karkeista lohkoista. Voit asentaa oman hiilihyppelypilastin, riippuen kokemustasosta ja projektin laajuudesta, neljästä kahdeksaan tuntiin.
Vaihe 1
Lisää 1/2 säkki laastia, kahdeksan pullaa puhdasta, tiilihiekkaa ja 3 gallonaa vettä kottikärryyn. Yhdistä ainesosat kuokkaan, työnnä ja vedä seosta kunnes saavutat pannukakun sakeuden. Anna laastin istua 15 minuutin ajan, lisää 1/4 gallonaa vettä ja remixiä kuolla.
Vaihe 2
Levitä mutaalusta jalustalle, jossa pilasteri sijoitetaan muurauslastalla. Koska pilasteri asennetaan ikään kuin seinän pidennys, varmista, että laasti asetetaan seinän pohjaan 16 x 16 tuuman neliöön. Pile laasti niin, että sinulla on sänky 2 tuumaa paksu.
Vaihe 3
Aseta kynsilohko laastille ja hankaa kevyesti paikalleen muurauslastalla. Aseta toinen sementtilohko edellisen lohkon vieressä samaan suuntaan ja aseta ne erilleen 3/8 tuumaa. Tasaa lohkot 4-jalkaisella tasolla ja varmista, että ne ovat neliöitä asettamalla puusepän neliö lohkojen ulkopuolelle.
Vaihe 4
Levitä 1 tuuman paksua laastikerrosta aiemmin asetettujen lohkojen päälle muurauslastalla. Aseta seuraavat kaksi lohkoa kääntämällä ne vastakkaiseen suuntaan kuin kaksi ensimmäistä. Napauta ne paikalleen lian kanssa. Aseta taso pystysuoraan ja vaakasuoraan lohkoihin tarkistaaksesi, että ne ovat tasoisia ja luodot. Jatka lohkojen asettamista criss-cross-kuvioon, kun työntät niitä ylöspäin.
Vaihe 5
Kun pilasteri on asetettu haluttuun korkeuteen, täytä nivelet aukkojen avulla. Aseta kalkki, joka on täynnä laasti laastaria, pitäkää lastankaalia hiekkalaatikoita vasten ja paina laasti laastaliitoksiin pistoolilla. Anna valmiin pilastin istua 24 tuntia ennen käyttöä.
Mitä tarvitset
- N-tyyppinen laasti
- Lapio
- Tiilihiekka
- vesi
- 5-litran kauha
- Kottikärryt
- Kuokka
- Muurauslasta
- Cinder-lohkot
- 4-jalkainen taso
- Puuseppä neliö
- Osoitelaikka
FAQ - 💬
❓ What is a pilaster block?
👉 Masonry pilaster wall consist of pilaster, which is rectangular projectile column constructed of masonry blocks in the face of the wall and provide extra strength to the wall, filler wall, and foundation. The pilaster is cantilevered up from the foundation and built at determine interval along the wall length.
❓ What purpose would a pilaster have in concrete wall construction?
👉 While the primary purpose of a pilaster is to provide lateral support, in many cases it may also be required to support vertical loads such as those imposed by beams or other framing members. When this occurs, pilasters are designed as columns and function as primarily as compression members.
❓ How do you make a block pilaster?
👉 0:572:10Adding a Pilaster to Concrete Block Freestanding WallsStart of suggested clipEnd of suggested clipFor the next course stack three column units on staggered bond and glue. Them then place a mediumMoreFor the next course stack three column units on staggered bond and glue. Them then place a medium wall unit in the open space left in the pilaster. And build the remaining wall outward.
❓ What is a pilaster in concrete?
👉 pilasters or pilasters are rectangular columns that project from within a wall. They are typically present where a structural load must be carried that exceeds the capabilities of the wall. The wall thickens to accommodate the structural requirements of the pilaster.
❓ What are the two different types of pilasters?
👉 There are a few types of pilasters to be aware of. A lesene is a pilaster shaft or strip without a base or capital. An anta is a post-like strip on either side of a door or the corners of buildings. When a pilaster appears at the corner intersection of two walls, it's called a canton.
❓ Are pilasters structural?
👉 In ancient Roman architecture the pilaster gradually became more and more decorative rather than structural, as it served to break up an otherwise empty expanse of wall.
❓ What are two types of pilasters?
👉 There are a few types of pilasters to be aware of. A lesene is a pilaster shaft or strip without a base or capital. An anta is a post-like strip on either side of a door or the corners of buildings. When a pilaster appears at the corner intersection of two walls, it's called a canton.
❓ Are pilasters load bearing?
👉 Pilaster is frequently also referred to as a non-ornamental, load-bearing architectural element in non-classical architecture where a structural load must be carried by a wall or column next to a wall and the wall thickens to accommodate the structural requirements of the wall.
❓ What does a pilaster look like?
👉 A pilaster is a rectangular, vertical wall protrusion that resembles a flat column or half pier. In architecture, pilasters are by definition "engaged," meaning they sticks out from flat surfaces. The pilaster projects only slightly from the wall and has a base, a shaft, and a capital like a column.
❓ What is the difference between a column and a pilaster?
👉 A column is a freestanding round shaft. A square column is called a pier. When a round column is attached to a wall, it is called an engaged column; and when a pier is attached to a wall, it is called a pilaster. (When a piece of wall breaks forward without any differing details, it is called an anta.)
❓ How high can a cinder block wall be built?
👉 A 4-inch-thick, nonreinforced concrete masonry screen wall should not be built higher than 6 feet, 8 inches unless it is supported laterally in the horizontal or vertical direction every 6 feet, 8 inches.
❓ What is a pilaster?
👉 Our pilasters are high-quality materials made to resemble the charm of wood, but without the deterioration and maintenance. They easily install with standard tools and have a paintable smooth white finish for a crisp polished look. With a variety of shapes and sizes, there's a design choice for every home style.
❓ How is a bonded pilaster constructed?
👉 A bonded pilaster may be constructed as an integral part of the wall or, where provisions for crack control are provided such as with control joints, they may be constructed as an unbonded structural member where lateral support is provided through the use of suitable connections.
❓ What is the wind load on a pilaster wall?
👉 The applicable building code specifies a minimum design wind load of 15 psf (718 Pa). Determine the required pilaster size and spacing for an 8 in. (203 mm) hollow unreinforced concrete masonry wall, constructed with Type S portland cement/lime or mortar cement mortar.
❓ What is Tek 10-2a for pilasters?
👉 See TEK 10-2A (ref. 2) for more options. Typically, pilasters are subject to little or no vertical load other than their own weight, and as such serve as flexural members. Pilasters required in this type of service must be able to resist bending while transferring the applied loads from the walls to the roof and foundation system.